POWER OUTLET SOCKET > INSTALLATION |
| 1. INSTALL CLIP |
![]() |
Engage the 2 claws to install the clip.
| 2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Align the grooves in the clip with the No. 1 power outlet socket assembly ribs, and then attach the No. 1 power outlet socket assembly as shown in the illustration.
| *a | Rib |
| *b | Groove |
| 3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
Horizontally engage the 2 hinges of the outer glove compartment door.
Engage the 2 stoppers to install the glove compartment door assembly.
Engage the claw to install the glove compartment door damper.