Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    B315192E01
  1. Disengage the claw and release the glove compartment door damper.
    Text in Illustration 
    *1
    Glove Compartment Door Damper



    B315193E01
  1. Release the 2 stoppers and open the glove compartment door assembly until it is horizontal.
    Text in Illustration 
    *1
    Stopper

  1. Pull the glove compartment door assembly horizontally backward to disengage the 2 hinges and remove the glove compartment door assembly.

    NOTICE:
    Be sure to pull the glove compartment door assembly horizontally to remove it.



2. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY


    B310175E01
  1. Using a screw driver with its tip wrapped in protective tape, remove the No. 1 power outlet socket assembly while pressing the inside claw.
    Text in Illustration 
    *1
    Protective Tape

  1. Disconnect the connector and remove the No. 1 power outlet socket assembly.

    HINT:
    If it is difficult to remove the No. 1 power outlet socket assembly, remove the lower instrument panel sub-assembly first and disengage the claw in the back.



3. REMOVE CLIP


    B310176
  1. Disengage the 2 claws and remove the clip.