Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

DTC    E24    Water Temperature Sensor Circuit Malfunction

for Preparation Click here


DESCRIPTION

In this circuit, the air conditioning control assembly receivers engine coolant temperature signals from the ECM using the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
E24
  1. Ignition switch : ON
  2. Engine coolant temperature data is interrupted for 0.5 second.
  1. Engine coolant temperature sensor
  2. Harness or connector between Engine coolant temperature sensor and ECM
  3. ECM
  4. air conditioning control assembly
  5. CAN communication system

WIRING DIAGRAM


E236633E01


INSPECTION PROCEDURE

HINT:
If there is an open or short in the engine coolant temperature sensor circuit, the ECM stores the DTCs. Troubleshoot the SFI System (Click here)

1.CHECK FOR DTC (ECM)
  1. Clear the DTCs (Click here)

  1. Check for DTCs (Click here)

    OK:
    DTC is not output.



NG
GO TO ENGINE CONTROL SYSTEM
OK


2.CHECK FOR DTCs THROUGH PANEL DIAGNOSIS
  1. Clear the DTCs.

  1. Recheck for DTCs. Based on the DTCs output above, try to force the A/C system to output DTCs by simulating the conditions indicated the DTC.

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC E24 is output
    B



B
REPLACE AIR CONDITIONING CONTROL ASSEMBLY
A

END