Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the RH side.



1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
  1. Engage the 3 claws to install the front No. 2 speaker assembly.

    NOTICE:
    Do not touch the cone part of the speaker.



2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:
Use the same procedure as for the LH side.