Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
  1. Check that there is no foreign matter in the front No. 2 speaker assembly, no tears on the front No. 4 speaker assembly cone or other abnormalities.



    E247985E01
  1. Measure the resistance of the front No. 2 speaker assembly.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (+) - 2 (+)
    Always
    3.4 to 4.6 Ω
    3 (-) - 4 (-)
    Always
    3.4 to 4.6 Ω

    If the result is not as specified, replace the front No. 2 speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 2 speaker assembly)