Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the RH side.



1. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:
Use the same procedure described for the No. 2 instrument panel speaker panel sub-assembly.



2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    E247209
  1. Disengage the 3 claws and remove the front No. 2 speaker assembly from the No. 2 instrument speaker panel sub-assembly.

    NOTICE:
    Do not touch the cone part of the speaker.