Home › Engine / Hybrid System › FA20 FUEL › INJECTOR DRIVER

INJECTOR DRIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL



2. REMOVE INJECTOR DRIVER


    A277974E02
  1. Move the lock levers in the direction indicated by the arrow to release the 3 connector locks. Disconnect the 4 connectors from the injector driver.
    Text in Illustration 
    *1
    Lock Lever
    *a
    Release
    V100135
    Lock with Connector
    V100136
    Normal Connector



    A277975
  1. Remove the 3 bolts and injector driver.

    NOTICE:
    Be careful not to drop or strike the injector driver.