FUEL PUMP (for High Pressure) > ON-VEHICLE INSPECTION |
| 1. CHECK FUEL PUMP OPERATION |
Check fuel pressure.
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure.
Check that the fuel pressure fluctuates when the target fuel pressure changes.
Check operating sound.
Remove the injector cover (for bank 2).
Start the engine.
![]() |
Using a sound scope, check the operating sound of the pump.
If no sound can be heard, check the fuel pump, wire harness and ECM.
Stop the engine.
Reinstall the injector cover (for bank 2).