Home › Engine / Hybrid System › FA20 FUEL › FUEL PUMP ECU

FUEL PUMP ECU > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL



2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure described for the LH side.



3. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure described for the LH side.



4. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH


    B299993
  1. Remove the bolt.

  1. Disengage the hook and remove the separate type rear seat cushion assembly LH.



5. SEPARATE LUGGAGE COMPARTMENT INNER TRIM COVER RH

HINT:
Use the same procedure described for the LH side.



6. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

HINT:
Use the same procedure described for the LH side.



7. REMOVE FUEL PUMP CONTROL ECU ASSEMBLY


    A278271
  1. Disconnect the fuel pump control ECU assembly connector.

  1. Remove the nut.



    A280562E01
  1. Push in the fuel pump control ECU assembly stud bolt.
    Text in Illustration 
    *1
    Stud Bolt
    *2
    Bracket

  1. Move the fuel pump control ECU assembly towards the rear of the vehicle, disengage the bracket, and remove the fuel pump control ECU assembly.

    NOTICE:
    Do not reuse the fuel pump control ECU assembly if it has been subjected to shocks.