LUGGAGE COMPARTMENT DOOR OPENER SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Trunk/BDoor Open SW | Luggage door opening switch signal/ON or OFF | ON: Luggage door opening switch assembly pushed OFF: Luggage door opening switch assembly not pushed | - |
| Trunk Cancel Switch* | Luggage door opening cancel switch signal/ON or OFF | ON: Luggage door opening cancel switch assembly pushed OFF: Luggage door opening cancel switch assembly not pushed | - |
| ACTIVE TEST |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Trunk and Back-Door Open | Operate luggage compartment door lock motor | ON/OFF | This test will open the trunk |