Home › Drivetrain · TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK TCM

C261065E01

HINT:
Each TCM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the TCM terminals.


Terminals No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
A19-9(D) - A18-33(E01)
BR - B-Y
D shift position switch signal
Ignition switch ON and shift lever in D and M
11 to 14 V
Ignition switch ON and shift lever except in D and M
Below 1 V
A19-10(R) - A18-33(E01)
V - B-Y
R shift position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever except in R
Below 1 V
A19-1(SFTD) - A18-33(E01)
BE - B-Y
Down shift switch signal
Ignition switch ON and shift lever in "-" (Down shift)
Below 1 V
A19-2(SFTU) - A18-33(E02)
SB - B-Y
Up shift switch signal
Ignition switch ON and shift lever in "+" (Up shift)
Below 1 V
A19-8(M) - A18-33(E01)
O-B - B-Y
M shift position switch signal
Ignition switch ON and shift lever in M
11 to 14 V
Ignition switch ON and shift lever except in M
Below 1 V
A19-3(P) - A18-33(E01)
BR - B-Y
Park position switch signal
Ignition switch ON and shift lever in P
11 to 14 V
Ignition switch ON and shift lever except in P
Below 1 V
A19-21(N) - A18-33(E01)
B-G - B-Y
Neutral position switch signal
Ignition switch ON and shift lever in N
11 to 14 V
Ignition switch ON and shift lever except in N
Below 1 V
A18-13(SLU+) - A18-1(SLU-)
LG - LG-Y
SLU solenoid signal
2nd, 3rd, 4th, 5th or 6th gear (each gear lock-up, M position)
Pulse generation
(See waveform 2)
A18-15(SR) - A18-33(E01)
R-B - B-Y
SR solenoid signal
1st, 2nd, 3rd or 4th gear
11 to 14 V
5th or 6th gear
Below 1 V
A18-14(S4) - A18-33(E01)
L-W - B-Y
S4 solenoid signal
2nd, 5th or 6th gear
11 to 14 V
1st, 3rd or 4th gear
Below 1 V
A18-6(S3) - A18-33(E01)
L-Y - B-Y
S3 solenoid signal
1st, 2nd or 3rd gear
11 to 14 V
4th, 5th or 6th gear
Below 1 V
A18-17(S2) - A18-33(E01)
L-O - B-Y
S2 solenoid signal
1st, 2nd or 6th gear
11 to 14 V
3rd, 4th or 5th gear
Below 1 V
A18-7(S1) - A18-33(E01)
Y - B-Y
S1 solenoid signal
1st gear
Below 1 V
Except 1st gear
11 to 14 V
A18-5(SL2+) - A18-11(SL2-)
BR-A - BR-B
SL2 solenoid signal
Engine idle speed
Pulse generation
(See waveform 3)
A18-16(SL1+) - A18-12(SL1-)
BR - BR-Y
SL1 solenoid signal
5th or 6th gear
Pulse generation
(See waveform 4)
A19-18(SP2+) - A19-7(SP2-)
B - W
Output speed sensor SP2 signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 6)
A19-17(NT+) - A19-28(NT-)
G - L
Input speed sensor NT signal
Engine idle speed (P or N position)
Pulse generation
(See waveform 5)
A18-4(SLT+) - A18-9(SLT-)
L-R - R-W
SLT solenoid signal
Engine idle speed
Pulse generation
(See waveform 1)
A18-22(OIL) - A18-23(EOIL)
R - G-B
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1 V
A18-33(E01) - Body ground
B-Y - Body ground
Ground
Always
Below 1 Ω
A18-3(E02) - Body ground
B-Y - Body ground
Ground
Always
Below 1 Ω
A18-29(CANH) - A18-33(E01)
B-W - B-Y
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 7)
A18-28(CANL) - A18-33(E01)
L - B-Y
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 8)
A18-34(IG1) - A18-33(E01)
P - B-Y
Starter signal
Ignition switch ON
11 to 14 V
A18-35(IG2) - A18-33(E01)
P - B-Y
Starter signal
Ignition switch ON
11 to 14 V
A18-26(BM) - A18-33(E01)
Y-R - B-Y
Battery
Always
11 to 14 V
A19-13(SPORT) - Body ground
L - B-Y
SPORT switch signal
Ignition switch ON and pattern select switch pressed continuously (SPORT)
11 to 14 V
Ignition switch ON and pattern select switch released (SPORT)
Below 1 V
A19-24(SNOW) - Body ground
W-R - B-Y
SNOW switch signal
Ignition switch ON and pattern select switch pressed continuously (SNOW)
11 to 14 V
Ignition switch ON and pattern select switch released (SNOW)
Below 1 V


    G023426E05
  1. Waveform 1
    Reference: 
    Terminal
    A18-4(SLT) - A18-9(SLT-)
    Tool setting
    5 V/DIV., 1 ms./DIV.
    Vehicle condition
    Engine idle speed



  2. G023426E05
  3. Waveform 2
    Reference: 
    Terminal
    A18-13(SLU+) - A18-1(SLU-)
    Tool setting
    5 V/DIV., 1 ms./DIV.
    Vehicle condition
    2nd, 3rd, 4th, 5th or 6th gear (each gear lock-up, M position)



  4. G023426E05
  5. Waveform 3
    Reference: 
    Terminal
    A18-5(SL2+) - A18-11(SL2-)
    Tool setting
    5 V/DIV., 1 ms./DIV.
    Vehicle condition
    Engine idle speed



  6. G023426E05
  7. Waveform 4
    Reference: 
    Terminal
    A18-16(SL1+) - A18-12(SL1-)
    Tool setting
    5 V/DIV., 1 ms./DIV.
    Vehicle condition
    5th or 6th gear



  8. G020663E08
  9. Waveform 5
    Reference: 
    Terminal
    A19-17(NT+) - A19-28(NT-)
    Tool setting
    5 V/DIV., 2 ms./DIV.
    Vehicle condition
    Engine idle speed (P or N position)



  10. G020663E09
  11. Waveform 6
    Reference: 
    Terminal
    A19-18(SP2+) - A19-7(SP2-)
    Tool setting
    1 V/DIV., 2 ms./DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)



  12. G036660E15
  13. Waveform 7
    Reference: 
    Terminal
    A18-29(CANH) - A18-33(E01)
    Tool setting
    1V/DIV., 10 ms./DIV.
    Vehicle condition
    Ignition switch ON



  14. G036661E14
  15. Waveform 8
    Reference: 
    Terminal
    A18-28(CANL) - A18-33(E01)
    Tool setting
    1V/DIV., 10 ms./DIV.
    Vehicle condition
    Ignition switch ON


CHECK MAIN BODY ECU (NETWORK GATEWAY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

B311498E03


*1
Instrument Panel Junction Block Assembly
*2
Main Body ECU (Network Gateway ECU)

HINT:
Each ECU terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECU terminals.


Terminals No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
D5-20(SLS+) - Body ground
R
Shift lock control unit assembly signal
Ignition switch ON, Shift lever P position, and Stop light switch ON
11 to 14 V
Ignition switch ON, Shift lever P position, and Stop light switch OFF
Below 1 V
3C-8 - Body ground
R
Stop light switch signal
Stop light switch ON
11 to 14 V
Stop light switch OFF
Below 1 V
3D-23 - Body ground
WL
Park position switch signal
Shift lever except P position
11 to 14 V
Shift lever P position
Below 1 V

HINT:
*1: Voltage is input intermittently as this is an intermittent circuit. (Voltage varies between a peak of 7.5 to 14 V and a low of 0 to1.5 V.)