Home › Vehicle Exterior › WINDOW / GLASS › RELAY

RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT RR DEF RELAY


    E222294E12
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Measurement Condition
    Specified Condition
    3 - 5
    Battery voltage applied between terminals 1 and 2
    Below 1 Ω
    Battery voltage not applied between terminals
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    ( RR DEF Relay)
    If the result is not as specified, replace the RR DEF relay.