Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > FAIL-SAFE CHART

for Preparation Click here



POWER WINDOW OPERATION IN FAIL-SAFE MODE

HINT:
If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.

  1. The power window control system prohibits the following power window operations when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.

    Power Window Regulator Master Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Ignition switch off
    (Key-off operation permitted)
    Ignition switch off
    (Key-off operation prohibited)
    Manual up (Driver side door window)
    X
    X
    -
    Manual down (Driver side door window)
    ○
    X
    -
    Auto up (Driver side door window)
    (hold switch at auto up position)
    ○*
    X
    -
    Auto up (Driver side door window)
    X
    X
    -
    Auto down (Driver side door window)
    X
    X
    -
    Manual up (Remote switch operation)
    X
    X
    -
    Manual down (Remote switch operation)
    X
    X
    -
    Auto up (Remote switch operation)
    (hold switch at auto up position)
    X
    X
    -
    Auto up (Remote switch operation)
    X
    X
    -
    Auto down (Remote switch operation)
    X
    X
    -

    Power Window Regulator Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Ignition switch off
    (Key-off operation permitted)
    Ignition switch off
    (Key-off operation prohibited)
    Manual up (Front passenger side door window)
    X
    X
    -
    Manual down (Front passenger side door window)
    ○
    X
    -
    Auto up (Front passenger side door window)
    (hold switch at auto up position)
    ○*
    X
    -
    Auto up (Front passenger side door window)
    X
    X
    -
    Auto down (Front passenger side door window)
    X
    X
    -

    HINT:
    1. ○: Operates
    2. X: Operation prohibited
    3. *: Operates in pull up the power window switch to the auto up position without jam protection


    1. Power window switch LED control

      HINT:
      During normal operation (fail-safe is not operating) the LED illuminate as shown in the illustration.

      1. For Driver Side:


        B179628E04


      2. For Front Passenger Side:


        B189869E31

    2. Fail-safe deactivation condition

      1. When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully open position. As a result, the auto up/down function will return.

  2. Initialization failure

    HINT:
    During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits the operations as follows:


    Power Window Regulator Master Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Ignition switch off
    (Key-off operation permitted)
    Ignition switch off
    (Key-off operation prohibited)
    Manual up (Driver side door window)
    X
    X
    -
    Manual down (Driver side door window)
    ○
    X
    -
    Auto up (Driver side door window)
    (hold switch at auto up position)
    ○*
    X
    -
    Auto up (Driver side door window)
    X
    X
    -
    Auto down (Driver side door window)
    X
    X
    -
    Manual up (Remote switch operation)
    X
    X
    -
    Manual down (Remote switch operation)
    X
    X
    -
    Auto up (Remote switch operation)
    (hold switch at auto up position)
    X
    X
    -
    Auto up (Remote switch operation)
    X
    X
    -
    Auto down (Remote switch operation)
    X
    X
    -

    Power Window Regulator Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Ignition switch off
    (Key-off operation permitted)
    Ignition switch off
    (Key-off operation prohibited)
    Manual up (Front passenger side door window)
    X
    X
    -
    Manual down (Front passenger side door window)
    ○
    X
    -
    Auto up (Front passenger side door window)
    (hold switch at auto up position)
    ○*
    X
    -
    Auto up (Front passenger side door window)
    X
    X
    -
    Auto down (Front passenger side door window)
    X
    X
    -

    HINT:
    1. ○: Operates
    2. X: Operation prohibited
    3. *: Operates in pull up the power window switch to the auto up position without jam protection


    1. Power window switch LED control

      HINT:
      During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM during fail-safe mode, the LED illuminates as shown in the illustration.

      1. For Driver Side:


        B322616E01


      2. For Front Passenger Side:


        B322616E01

  3. LIN communication failure

    HINT:
    If the LIN communication line malfunctions (communication stop), the power window control system prohibits the operations as follows:


    Power Window Regulator Master Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Manual up
    ○*
    Manual down
    ○
    Auto up (hold switch at auto up position)
    ○*
    Auto up
    ○*
    Auto down
    ○

    Power Window Regulator Switch Assembly 
    Power Window Operation
    Condition
    Ignition switch ON
    Manual up
    ○*
    Manual down
    ○
    Auto up (hold switch at auto up position)
    ○*
    Auto up
    ○*
    Auto down
    ○

    HINT:
    1. ○: Operates
    2. X: Operation prohibited
    3. *: Jam protection can operate.
    4. Remote up/down function does not operate.

  4. LIN communication failure and pulse sensor failure

    HINT:
    If the LIN communication line malfunctions (communication stop) and the pulse sensor for the jam protection function has problems, the power window control system prohibits the operations as follows:


    Power Window Regulator Master Switch Assembly 
    Power Window Operation
    Condition
    Always
    Manual up
    X
    Manual down
    X
    Auto up (hold switch at auto up position)
    X
    Auto up
    X
    Auto down
    X

    Power Window Regulator Switch Assembly 
    Power Window Operation
    Condition
    Always
    Manual up
    X
    Manual down
    X
    Auto up (hold switch at auto up position)
    X
    Auto up
    X
    Auto down
    X

    HINT:
    1. ○: Operates
    2. X: Operation prohibited
    3. Driver door window: When the jam protection function does not operate due to a LIN communication failure, the manual up and auto up functions will not operate.
    4. Remote switch operation: Not operative during a LIN communication failure

  5. LIN communication failure and abnormal window position learned value or initialization failure

    HINT:
    If the LIN communication line malfunctions (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits the operations as follows:


    Power Window Regulator Master Switch Assembly 
    Power Window Operation
    Condition
    Always
    Manual up
    X
    Manual down
    ○
    Auto up (hold switch at auto up position)
    ○*
    Auto up
    X
    Auto down
    X

    HINT:
    1. ○: Operates
    2. X: Operation prohibited
    3. *: Operates in pull up the power window switch to the auto up position without jam protection
    4. Remote switch operation: Operation is not possible during a LIN communication failure.