Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM

AIRBAG SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



GENERAL
  1. Deceleration sensors used for the airbag system are installed on various parts on the vehicle and calculate the deceleration rate of each part during a collision.

  2. Depending on the situation, the airbag ECU assembly sends a deployment signal to each airbag based on the information from each sensor.


DEPLOYMENT CONDITION


  1. FRONTAL COLLISION


    C190283E13


    1. Frontal collision signals are produced based on the information from the airbag ECU assembly and front airbag sensors.



  2. SIDE COLLISION


    C263382E01


    1. Side collision signals are produced based on the information from the airbag ECU assembly, side airbag sensor assembly ,side No. 2 airbag sensor assembly ,rear airbag sensor and No. 2 airbag sensor assembly.