Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM

AIRBAG SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK (USING GTS)
  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch to ON, and wait for approximately 60 seconds.

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / SRS Airbag / Trouble Codes.

  6. Check for DTCs by following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.


DTC CLEAR (USING GTS)
  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch to ON, and wait for approximately 60 seconds.

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / SRS Airbag / Trouble Codes.

  6. Clear the DTCs by following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.