Component
| Function
|
Tire Pressure Warning ECU and Receiver
| - Receives the data from the tire pressure warning valve and transmitter and monitors the tire pressure.
- When the tire pressure warning ECU and receiver detects a drop in the tire pressure or a system malfunction, it outputs the respective signal to the combination meter assembly.
- When the tire pressure warning ECU and receiver detects a problem with the vehicle speed signal, it uses changes in the signal strength from the tire pressure warning valve and transmitter as a judgment standard. If the ECU detects any changes in the signal strength from the tire pressure warning valve and transmitter, it determines that the vehicle is being driven.
|
Tire Pressure Warning Valve and Transmitter
| Detects the pressure and internal temperature of the tire and transmits the measured values and the ID code to the tire pressure warning ECU and receiver.
|
Tire Pressure Warning Reset Switch
| The appropriate air pressures of the tires currently mounted on the vehicle are stored in the tire pressure warning ECU and receiver by operating the tire pressure warning reset switch.
|
Combination Meter Assembly
| Transmits the tire pressure warning light signal to the tire pressure warning ECU and receiver.
|
Tire Pressure Warning Light
| - Illuminates after blinking for 1 minute to warn the driver in accordance with the signal from the tire pressure warning ECU and receiver.
- Displays 2-digit Diagnostic Trouble Codes (DTC).
|
Main Body ECU (Network Gateway ECU)
| - The main body ECU (network gateway ECU) and tire pressure warning ECU and receiver are connected using 2 direct lines that they use to communicate with each other.
- The main body ECU (network gateway ECU) is connected to the combination meter assembly via CAN No. 1 bus.
|