ENTRY AND START SYSTEM (for Start Function) > DTC CHECK / CLEAR |
| CHECK DTC (POWER SOURCE CONTROL) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
Check for DTCs.
| CHECK DTC (ENTRY AND START) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry & Start / Trouble Codes.
Check for DTCs.
| CHECK DTC (ENGINE) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Check for DTCs.
| CLEAR DTC (POWER SOURCE CONTROL) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
Clear the DTCs by following the directions on the GTS display.
| CLEAR DTC (ENTRY AND START) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry & Start / Trouble Codes.
Clear the DTCs by following the directions on the GTS display.
| CLEAR DTC (ENGINE) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Clear the DTCs by following the directions on the GTS display.