Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM

WIPER AND WASHER SYSTEM > PRECAUTION

for Preparation Click here



1.IGNITION SWITCH EXPRESSION
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression
Ignition Switch (Position)
Engine Switch (Condition)
Ignition switch off
LOOK
Off (Lock)
Ignition switch ACC
ACC
On (ACC)
Ignition switch ON
ON
On (IG)
Engine start
START
On (Start)

2.WASHER NOZZLE ADJUSTMENT PRECAUTION
  1. Using a 2 thin-bladed screwdrivers with its tip wrapped in protective tape, adjust the direction of the washer nozzle sub-assembly.

    NOTICE:
    Do not insert the screwdriver into the washer fluid spraying nozzle. Doing so may damage the washer fluid spraying nozzle, resulting in spraying problems.

    HINT:
    Use the upper and lower adjustment grooves of the nozzle to adjust the washer nozzle.