Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Entry and Start System)

DOOR CONTROL TRANSMITTER (w/o Entry and Start System) > INSTALLATION

for Preparation Click here


NOTICE:
Take extra care when handling these precision electronic components.



1. INSTALL TRANSMITTER BATTERY


    B250772
  1. Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

    NOTICE:
    1. Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.
    2. Do not bend the transmitter battery electrode during insertion.
    3. Keep the transmitter cover interior free of dust and oil.
    4. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter from being damaged.



    B250773
  1. Engage the hook and install the transmitter battery cover.

    NOTICE:
    Securely engage the claws of the cover to prevent the poor contact between the battery and terminal.



2. INSTALL DOOR CONTROL TRANSMITTER PACKING
  1. Install the door control transmitter packing.



3. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY


    B250775
  1. Install the door control transmitter module set sub-assembly.



4. INSTALL TRANSMITTER HOUSING COVER


    B311587
  1. Install the transmitter housing cover onto the transmitter housing case securely.

  1. After the installation, press any of the transmitter switches.