Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE NO. 1 ENGINE UNDER COVER


    A278294
  1. Disengage the 7 clips and remove the 12 bolts and No. 1 engine under cover.



3. REMOVE NO. 2 ENGINE UNDER COVER


    A278295
  1. Remove the 7 bolts and the No. 2 engine under cover.



4. REMOVE REAR ENGINE UNDER COVER LH


    C256602
  1. Remove the 3 clips and rear engine under cover LH.



5. REMOVE REAR ENGINE UNDER COVER RH

HINT:
Perform the same procedure as for the LH side.



6. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C256592
  1. Using a socket hexagon 6 mm, fix the stud bolt, and remove the nut.

  1. Remove the front stabilizer link assembly LH from the front shock absorber with coil spring.



    C261007
  1. Using a socket hexagon 6 mm, fix the stud bolt, and remove the nut.

  1. Remove the front stabilizer link assembly LH from the front stabilizer bar.



7. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as for the LH side.



8. REMOVE REAR BODY MOUNTING CUSHION SUB-ASSEMBLY LH


    C256603
  1. Remove the 4 bolts, and remove the front stabilizer bar and the body mounting cushion sub-assembly LH together.
    Text in Illustration 
    V100135
    Bolt
    V100136
    Vehicle for Front Side



9. REMOVE REAR BODY MOUNTING CUSHION SUB-ASSEMBLY RH

HINT:
Perform the same procedure as for the LH side.



10. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    C256604
  1. Remove the bolt, nut and front No. 2 stabilizer bracket LH from the rear body mounting cushion sub-assembly.



11. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

HINT:
Perform the same procedure as for the LH side.



12. REMOVE FRONT STABILIZER BAR
  1. Remove the front stabilizer bar from the rear body mounting cushion sub-assembly.



13. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING (for LH Side)
  1. Remove the front No. 1 stabilizer bar bushing from the front stabilizer bar.



14. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING (for RH Side)

HINT:
Perform the same procedure as for the LH side.