Home › Vehicle Interior › DOOR LOCK › KEY REMINDER WARNING SYSTEM (w/o Entry and Start System)

KEY REMINDER WARNING SYSTEM (w/o Entry and Start System) > TERMINALS OF ECU

for Preparation Click here



CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (NETWORK GATEWAY ECU)

B311498E01


Text in Illustration 
*1
Instrument Panel Junction Block Assembly
*2
Main Body ECU (Network Gateway ECU)
  1. Remove the main body ECU (network gateway ECU) from the instrument panel junction block assembly.

  2. Disconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.

  3. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    MB-1 (BECU) - Body ground
    None - Body ground
    Battery power supply
    Always
    11 to 14 V
    MB-8 (IG) - Body ground
    None - Body ground
    Ignition switch power supply
    Ignition switch ON
    11 to 14 V
    Ignition switch off
    Below 1 V
    MB-9 (ACC) - Body ground
    None - Body ground
    ACC power supply
    Ignition switch ACC
    11 to 14 V
    Ignition switch off
    Below 1 V
    MB-11 (GND) - Body ground
    None - Body ground
    Ground
    Always
    Below 1 Ω
    MB-32 (BMPX) - Body ground
    None - Body ground
    Battery power supply
    Always
    11 to 14 V
    D5-22 (KSW) - Body ground
    BR - Body ground
    Unlock warning switch input
    No Key in ignition key cylinder (off)
    Below 1 V
    Key inserted ignition key cylinder (on)
    11 to 14 V
    D6-1 (GND) - Body ground
    B - Body ground
    Ground
    Always
    Below 1 Ω
    A73-4 (GND) - Body ground
    B-Y - Body ground
    Ground
    Always
    Below 1 Ω

  4. Reconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.

  5. Install the main body ECU (network gateway ECU) to the instrument panel junction block assembly.

  6. Measure the voltage, check for pulse according to the valve(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    3A-28 - Body ground
    V - Body ground
    Driver side door courtesy light switch input
    Driver side door open
    Below 1 V
    Driver side door closed
    11 to 14 V