Function
| Outline
|
Manual up-and-down function
| Function that causes the window to go up while the power window switch is being pulled halfway and to go down while pushed halfway. The window stops as soon as the switch is released.
|
Auto up-and-down function
| Function that enables windows of driver door to be fully opened or closed by one full pull or push of the power window regulator master switch assembly and power window regulator switch assembly.
|
Window lock function
| - Function that disables power window regulator switch assembly (for Front passenger side) operations when the window lock switch is pressed.
- The power window regulator switch assembly (for Front passenger side) can be operated when the window lock switch is pressed again.
|
Jam protection function
| Function that automatically stops power window and moves it downward if a foreign object gets jammed in door window during auto up and manual up operation.
|
Remote control function
| Function that allows the power window regulator master switch assembly to control manual up-and-down operations of the front passenger side door window.
|
Key-off operation function
| - Function that makes it possible to operate all door power windows for approximately 45 sec. after the ignition switch is turned off when the driver side door or front passenger side door has not been opened.
- If 45 sec. have passed or a front door is opened while the manual function is operating, the window operation stops (Driver door and front passenger side door).
|
Index function
| - Open the driver or front passenger side door, and then check that the window glass whose door is just opened descends approximately 20 mm (0.787 in.) automatically from the fully closed position.
- Close the driver door or front passenger side door, and then check that the window glass whose door has just been closed ascends automatically to the fully closed position.
|
Diagnosis
| Function that allows diagnosis of the power window control system if the power window ECU (built into the power window regulator motor assembly) detects a malfunction in the system. If a malfunction is detected, the power window ECU will illuminate the LED on the power window regulator master switch assembly to inform the driver of the malfunction.
|
Fail-safe
| A fail-safe function to disable a part of power window functions if the pulse sensor in the power window motor has a malfunction (Driver door). Auto up-and-down function and remote control function are disabled (Driver door).
|