Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    B271232E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Driver seat belt unfastened
    Below 1 Ω
    1 - 2
    Driver seat belt fastened
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Driver Side))
    If the result is not as specified, replace the front seat inner belt assembly (for Driver Side).



2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    B311364E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-2 - G3-2
    Always
    Below 1 Ω
    A-1 - G3-1
    Driver seat belt unfastened
    Below 1 Ω
    A-1 - G3-1
    Driver seat belt fastened
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Front Passenger Side))
    If the result is not as specified, replace the front seat inner belt assembly (for Front Passenger Side).