Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER

FRONT SEATBACK HEATER > INSPECTION

for Preparation Click here



1. INSPECT SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY) LH


    B313954E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Separate Type Front Seatback Pad LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    5.29 to 6.45 Ω

    If the result is not as specified, replace the separate type front seatback pad LH.



2. INSPECT SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY) RH


    B313954E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Separate Type Front Seatback Pad RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    5.29 to 6.45 Ω

    If the result is not as specified, replace the separate type front seatback pad RH.