Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER

FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) LH


    B313952E02
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Separate Type Front Seat Cushion Pad LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - H18-3
    Always
    Below 1 Ω
    A-2 - H18-2
    Always
    6.01 to 7.33 Ω
    H18-1 - H18-2
    Always
    6.01 to 7.33 Ω

    If the result is not as specified, replace the separate type front seat cushion pad LH.



2. INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) RH


    B313952E03
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Separate Type Front Seat Cushion Pad RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - G4-3
    Always
    Below 1 Ω
    A-2 - G4-2
    Always
    6.01 to 7.33 Ω
    G4-1 - G4-2
    Always
    6.01 to 7.33 Ω

    If the result is not as specified, replace the separate type front seat cushion pad RH.