Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP

VACUUM PUMP > REMOVAL

for Preparation Click here



1. REMOVE VACUUM TUBE CONNECTOR HOSE


    A276557E01
  1. Change the locations of the front hood stay from A to B, and support the hood sub-assembly with the location B.



    C260988
  1. Disconnect the vacuum tube connector hose from the vacuum pump assembly.



2. REMOVE FRONT SUSPENSION UPPER TO COWL BRACE SUB-ASSEMBLY RH
(Click here)


3. REMOVE VACUUM PUMP ASSEMBLY


    C260987
  1. Remove the 3 bolts and vacuum pump assembly.



    C262997E01
  1. Remove the O-ring.

  1. Remove the seal packing from the vacuum pump assembly and the engine.