Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

DTC    U0073    Control Module Communication Bus OFF

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0101    Lost Communication with TCM

DTC    U0122    Lost Communication with Vehicle Dynamics Control Module

DTC    U0140    Lost Communication with Body Control Module

DTC    U0155    Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)

DTC    U0401    Invalid Data Received from ECM/PCM "A"

DTC    U0402    Invalid Data Received from TCM

DTC    U0416    Invalid Data Received from Vehicle Dynamics Control Module

DTC    U0422    Invalid Data Received from Body Control Module

DTC    U0423    Invalid Data Received from Instrument Panel Cluster Control Module

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detecting Condition
Trouble Area
U0073
Control Module Communication Bus Off
  1. CAN communication system
U0100
Lost Communication With ECM/PCM "A"
  1. CAN communication system
  2. Electric power steering ECM
U0101
Lost Communication With TCM
  1. CAN communication system
  2. Main body ECU (network gateway ECU)
U0122
Lost Communication with Vehicle Dynamics Control Module
  1. CAN communication system
  2. Combination meter assembly
U0140
Lost Communication with Body Control Module
  1. CAN communication system
  2. Main body ECU
U0155
Lost Communication With Instrument Panel Cluster Control Module
  1. CAN communication system
  2. Combination meter assembly
U0401
Invalid Data Received from ECM/PCM "A"
  1. CAN communication system
  2. ECM
U0402
Invalid Data Received from TCM
  1. CAN communication system
  2. Combination meter assembly
U0416
Invalid Data Received from Vehicle Dynamics Control Module
  1. CAN communication system
  2. Combination meter assembly
U0422
Invalid Data Received from Body Control Module
  1. CAN communication system
  2. Main body ECU (network gateway ECU)
U0423
Invalid Data Received from Instrument Panel Cluster Control Module
  1. CAN communication system
  2. Combination meter assembly

INSPECTION PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

HINT:
Refer to CAN Communication System (Click here).


NEXT

END