Home › Vehicle Exterior › MIRROR (EXT) › RELAY

RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT MIR HTR RELAY


A188757E02
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      3 - 5
      Battery voltage not applied to terminals 1 and 2
      10 kΩ or higher
      Battery voltage applied to terminals 1 and 2
      Below 1 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (MIR HTR Relay)
      1. If the result is not as specified, replace the MIR HTR relay.