TRIP SWITCH > INSPECTION |
| 1. INSPECT TRIP SWITCH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 2 (TRIP) - 1 | Trip switch off | 10 kΩ or higher |
| Trip switch on | Below 1 Ω | |
| 3 (DISP) - 1 | Display switch off | 10 kΩ or higher |
| Display switch on | Below 1 Ω | |
| 8 (CS) - 1 | Unit switch off | 10 kΩ or higher |
| Unit switch on | Below 1 Ω |
| *a | Component without harness connected (Trip Switch) |