Home › Drivetrain ยท CLUTCH › CLUTCH PEDAL SWITCH (for RHD)

CLUTCH PEDAL SWITCH (for RHD) > REMOVAL

for Preparation Click here



1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
(Click here)


2. REMOVE CLUTCH START SWITCH ASSEMBLY


C262095
  1. Disconnect the clutch start switch connector.

  1. Remove the nut and the clutch start switch assembly from the clutch pedal support sub-assembly.

    HINT:
    Do not turn the clutch start switch assembly.



3. REMOVE CLUTCH SWITCH ASSEMBLY
  1. Disconnect the clutch switch connector.



    C258493
  1. Remove the nut and the clutch switch assembly from the clutch pedal support sub-assembly.

    HINT:
    Do not turn the clutch switch assembly.