Home › Engine / Hybrid System › FA20 ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL



2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)


    A276535
  1. Disconnect the camshaft timing oil control valve connector.

  1. Remove the 2 bolts and the camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)


    A276537
  1. Disconnect the camshaft timing oil control valve connector.

  1. Remove the 2 bolts and the camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



4. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE


    A283417
  1. Loosen the hose clamp and disconnect the No. 2 ventilation hose.



    A283418
  1. Disconnect the mass air flow meter connector.

  1. Disengage the clamp and separate the wire harness from the air cleaner cap.



    A283419
  1. Loosen the 2 hose clamps.



    A283420
  1. Remove the 3 bolts and the air cleaner cap with air cleaner hose.



5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)


    A276533
  1. Disconnect the camshaft timing oil control valve connector.

  1. Remove the 2 bolts and the camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)


    A276536
  1. Disconnect the camshaft timing oil control valve connector.

  1. Remove the 2 bolts and the camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.