VACUUM SENSOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Air Conditioning System) |
![]() |
Disengage the 3 craws and remove the No. 1 engine cover sub-assembly.
| 3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR |
![]() |
Disconnect the manifold absolute pressure sensor connector.
![]() |
Remove the bolt and manifold absolute pressure sensor.
![]() |
Remove the O-ring from the manifold absolute pressure sensor.