Warning/Indicator
Item
| Signal Description
|
FRONT FOG*1
| Receives front fog light signal from main body ECU (network gateway ECU) (CAN).
|
TURN
| Receives turn signal from turn signal flasher assembly (Direct line).
|
REAR FOG*2
| Receives rear fog light signal from main body ECU (network gateway ECU) (CAN).
|
SET*3
| Receives cruise control switch signal from the ECM (CAN).
|
CRUISE (green)*3*4
| Receives cruise control switch signal from the ECM (CAN).
|
CRUISE (yellow)*3*4
| Receives cruise control switch signal from the ECM (CAN).
|
DOOR*4
| Open door indicator illuminates when receiving signal from main body ECU (network gateway ECU) (CAN).
|
HI BEAM
| Receives high beam signal from main body ECU (network gateway ECU) (CAN).
|
Leveling
| Receives malfunction check headlight leveling warning signal from headlight leveling ECU (Direct line).
|
SECURITY
| Receives security signal from main body ECU (network gateway ECU) (CAN).
|
SMART (green)*5
| Receives smart start signal from the certification ECU (smart key ECU assembly) (CAN).
|
SMART (yellow)*5
| Receives smart fail signal from the certification ECU (smart key ECU assembly) (CAN).
|
REV*6*7
| Receives engine speed signal from the ECM (CAN).
|
SLIP
| Receives VSC control signal or malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
ABS
| Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
D SEAT BELT
| Receives driver seat belt warning signal (unfastened) from main body ECU (network gateway ECU) (Direct line).
|
CHARGE
| Receives malfunction signal from generator assembly (Direct line).
|
OIL PRESSURE
| Receives engine oil pressure warning signal from engine oil pressure switch assembly (Direct line).
|
MIL
| Receives malfunction check engine warning signal from ECM (CAN).
|
SPORT*4*8
| Receives sport indicator signal from TCM (CAN).
|
SNOW*4*8
| Receives snow indicator signal from TCM (CAN).
|
AT OIL TEMP*4*8
| Receives malfunction signal from TCM (CAN).
|
BRAKE
| - Receives brake fluid level warning signal from brake level switch (Direct line).
- Receives parking brake switch signal from main body ECU (network gateway ECU) (CAN).
- Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
TRC OFF
| Receives TRC control off signal from brake actuator assembly (skid control ECU) (CAN).
|
VSC OFF
| Receives VSC control off signal from brake actuator assembly (skid control ECU) (CAN).
|
TRACK*4
| Receives VSC sport signal from brake actuator assembly (skid control ECU) (CAN).
|
AIRBAG
| Receives malfunction signal from airbag sensor assembly (CAN).
|
EPS
| Receives malfunction signal from power steering ECU assembly (CAN).
|
LOW FUEL
| Receives low fuel signal from fuel sender gauge assembly (Direct line).
|
TIRE PRESSURE*9
| Receives malfunction or low tire pressure signal from main body ECU (network gateway ECU) (CAN).
|
WATER TEMP (HOT)*7
| Receives water temperature signal from ECM (CAN).
|
WATER TEMP (COLD)*7
| Receives water temperature signal from ECM (CAN).
|
MASTER*7
| Master warning indicator illuminates when receiving each warning signal from related ECU (CAN/Direct line).
|
LED HEADLIGHT
| Receives LED headlight indicator signal from main body ECU (network gateway ECU) (CAN).
|
HILL START ASSIST
| Receives hill start assist control signal from brake actuator assembly (skid control ECU) (CAN).
|
Multi-Information Display (except TFT Meter Type)
Item
| Signal Description
|
ODO/TRIP
| - Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
- Receives ODO/TRIP signal from trip switch (Direct line).
|
A/T shift indicator*1
| - Receives shift position signal (P, R, N, D) from TCM (CAN).
- Receives shift range signal (1 to 6) from TCM (CAN).
- Receives mode indicator signal from TCM (CAN).
|
A/T shift up indicator*1
| Receives UP display request signal from TCM (CAN).
|
A/T shift down indicator*1
| Receives DOWN display request signal from TCM (CAN).
|
M/T shift indicator*2
| Receives gear range signal from ECM (CAN).
|
M/T shift up indicator*2
| Receives shift up signal from ECM (CAN).
|
M/T shift down indicator*2*4
| Receives shift down signal from ECM (CAN).
|
Ambient temperature
| - Receives vehicle speed signal from ECM (CAN).
- Receives ambient temperature signal from thermistor assembly (Direct line).
|
Average fuel consumption
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
- Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
|
Instantaneous fuel consumption
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
- Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
|
Digital speedometer*3
| Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
|
Multi-Information Display (for TFT Meter Type)
Item
| Signal Description
|
ODO/TRIP
| - Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
- Receives ODO/TRIP signal from trip switch (Direct line).
|
Digital speedometer
| Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
|
Ambient temperature
| - Receives vehicle speed signal from ECM (CAN).
- Receives ambient temperature signal from thermistor assembly (Direct line).
|
Instantaneous fuel consumption
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
- Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
|
Average fuel consumption
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from brake actuator assembly (skid control ECU) (CAN).
- Receives integrated value signal of vehicle speed pulses from brake actuator assembly (skid control ECU) (CAN).
|
Drivable distance
| - Receives engine speed signal from ECM (CAN).
- Receives engine model information signal from ECM (CAN).
- Receives vehicle speed signal from skid control ECU (brake actuator assembly) (CAN).
- Receives low fuel signal from fuel sender gauge assembly (Direct line).
|
Average vehicle speed
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from skid control ECU (brake actuator assembly) (CAN).
|
Elapsed time
| Receives engine speed signal from ECM (CAN).
|
Total distance
| - Receives engine speed signal from ECM (CAN).
- Receives fuel injection volume signal from ECM (CAN).
- Receives vehicle speed signal from skid control ECU (brake actuator assembly) (CAN).
|
A/T shift indicator*1
| - Receives shift position signal (P, R, N, D) from TCM (CAN).
- Receives shift range signal (1 to 6) from TCM (CAN).
- Receives mode indicator signal from TCM (CAN).
|
A/T shift up indicator*1
| Receives UP display request signal from TCM (CAN).
|
A/T shift down indicator*1
| Receives DOWN display request signal from TCM (CAN).
|
M/T shift indicator*2
| Receives gear range signal from ECM (CAN).
|
M/T shift up indicator*2
| Receives shift up signal from ECM (CAN).
|
M/T shift down indicator*2*3
| Receives shift down signal from ECM (CAN).
|
Low fuel indicator
| Receives low fuel signal from fuel sender gauge assembly (Direct line).
|
Cruise control indicator (green)*4
| Receives cruise control switch signal from the ECM (CAN).
|
Cruise control indicator (yellow)*4
| Receives cruise control switch signal from the ECM (CAN).
|
Cruise control SET indicator*4
| Receives cruise control switch signal from the ECM (CAN).
|
SPORT indicator*1
| Receives sport indicator signal from TCM (CAN).
|
SNOW indicator*1
| Receives snow indicator signal from TCM (CAN).
|
AT OIL TEMP indicator*1
| Receives malfunction signal from TCM (CAN).
|
TRACK indicator
| Receives VSC sport signal from brake actuator assembly (skid control ECU) (CAN).
|
Water temperature meter
| Receives water temperature signal from the ECM (CAN).
|
Oil temperature meter
| Receives engine oil temperature signal from the ECM (CAN).
|
Voltage meter
| Receives battery voltage signal from the ECM (CAN).
|
G meter
| - Receives G sensor signal from skid control ECU (brake actuator assembly) (CAN).
- Receives steering sensor signal from airbag sensor assembly (CAN).
- Receives accelerator opening angle signal from ECM (CAN).
|
Torque curve
| Receives engine torque signal from ECM (CAN).
|
Brake Malfunction
| - Receives malfunction signal from skid control ECU (brake actuator assembly) (CAN).
- Receives brake fluid level warning signal from brake level switch (Direct line).
|
Each door warning (image display)
| Receives each door courtesy switch signal from main body ECU (network gateway ECU) (CAN).
|
Auto Power Off to Conserve Battery
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Shift to P position when parked*1
| - Receives shift position signal (P, N) from TCM (CAN).
- Receives engine speed signal from ECM (CAN).
- Receives vehicle speed signal from skid control ECU (brake actuator assembly) (CAN).
- Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Check Power Steering System
| Receives multi-information request signal from power steering ECU (CAN).
|
Key not detected
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Check SRS Airbag System
| Receives malfunction signal from airbag sensor assembly (CAN).
|
Check ABS
| Receives malfunction signal from skid control ECU (brake actuator assembly) (CAN).
|
Engine Coolant High Temperature
| Receives water temperature signal from ECM (CAN).
|
Check Access System with Elec. Key
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Transmission Fluid High Temperature
| - Receives transmission fluid temperature signal from skid control ECU (brake actuator assembly) (CAN).
- Receives engine speed signal from ECM (CAN).
|
Turn Power Off
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Key detected in vehicle
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Turn Lights Off
| Receives light reminder signal from main body ECU (network gateway ECU) (CAN).
|
Depress brake pedal, touch engine switch with key*1
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Depress clutch pedal touch engine switch with key*2
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Depress brake pedal and push engine switch to start*1
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Depress clutch pedal and push engine switch to start*2
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Shift to P position to Start*1
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Steering Lock active
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Key Battery Low
| Receives smart system warning signal from certification ECU (smart key ECU assembly) (CAN).
|
Fuel Low
| Receives low fuel signal from fuel sender gauge assembly (Direct line).
|
Tire pressure warning (image display)*5
| Receives malfunction or low tire pressure signal from main body ECU (network gateway ECU) (CAN).
|
TRC Off
| Receives TRC indicator request signal from main body ECU (network gateway ECU) (CAN).
|
Roads may be icy
| - Receives vehicle speed signal from ECM (CAN).
- Receives ambient temperature signal from thermistor assembly (Direct line).
|