Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (NETWORK GATEWAY ECU)

B311498E01


Text in Illustration 
*1
Instrument Panel Junction Block Assembly
*2
Main Body ECU (Network Gateway ECU)
  1. Remove the main body ECU (network gateway ECU) from the instrument panel junction block assembly.

  2. Disconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.

  3. Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

    Terminal No.
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    MB-1 (BECU) - Body ground
    None - Body ground
    Battery power supply
    Always
    11 to 14 V
    MB-8 (IG) - Body ground
    None - Body ground
    Ignition switch power supply
    Ignition switch ON
    11 to 14 V
    Ignition switch off
    Below 1 V
    MB-9 (ACC) - Body ground
    None - Body ground
    ACC power supply
    Ignition switch ACC
    11 to 14 V
    Ignition switch off
    Below 1 V
    MB-11 (GND) - Body ground
    None - Body ground
    Ground
    Always
    Below 1 Ω
    MB-32 (BMPX) - Body ground
    None - Body ground
    Battery power supply
    Always
    11 to 14 V
    D5-22 (KSW) - Body ground*
    BR - Body ground
    Unlock warning switch input
    No key in ignition key cylinder (off)
    Below 1 V
    Key inserted ignition key cylinder (on)
    11 to 14 V
    D6-1 (GND) - Body ground
    B - Body ground
    Ground
    Always
    Below 1 Ω
    A73-4 (GND) - Body ground
    B-Y - Body ground
    Ground
    Always
    Below 1 Ω

    1. *: w/o Entry and Start System

  4. Reconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.

  5. Install the main body ECU (network gateway ECU) to the instrument panel junction block assembly.

  6. Measure the voltage and resistance, check for pulse according to the valve(s) in the table below.

    Terminal No.
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D5-11 (L2) - Body ground*1
    Y - Body ground
    Driver side door lock and unlock switch input
    Driver side door key cylinder in lock position
    Below 1 V
    Driver side door key cylinder in neutral position
    Pulse generation
    D5-12 (UL2) - Body ground*1
    GR - Body ground
    Driver side door lock and unlock switch input
    Driver side door key cylinder in unlock position
    Below 1 V
    Driver side door key cylinder in neutral position
    Pulse generation
    D5-22 (ACC) - Body ground*2
    W - Body ground
    ACC power supply
    Ignition switch ACC
    Below 1 V
    Ignition switch off
    11 to 14 V
    3A-28 - Body ground
    Y - Body ground
    Driver side door courtesy light switch input
    Driver side door open
    Below 1 V
    Driver side door closed
    11 to 14 V
    3B-13 - Body ground
    L - Body ground
    Passenger side door courtesy light switch input
    Passenger side door open
    Below 1 V
    Passenger side door closed
    11 to 14 V
    3B-2 - Body ground
    Y - Body ground
    Door lock motor lock drive output (for driver side)
    Door control switch not pushed
    Below 1 V
    Lock side of door control switch pushed
    11 to 14 V
    3B-3 - Body ground
    L - Body ground
    Door lock motor lock drive output (for passenger side)
    Door control switch not pushed
    Below 1 V
    Lock side of door control switch pushed
    11 to 14 V
    3B-1 - Body ground*3, *4
    R-G - Body ground
    Door lock motor unlock drive output (for driver side)
    Door control switch not pushed
    Below 1 V
    Unlock side of door control switch pushed
    11 to 14 V
    3D-11 - Body ground*5, *6
    R-G - Body ground
    Door lock motor unlock drive output (for driver side)
    Door control switch not pushed
    Below 1 V
    Unlock side of door control switch pushed
    11 to 14 V
    3A-51 - Body ground
    G-Y - Body ground
    Driver side door control switch input
    Door control switch not pushed
    Pulse generation
    Lock side of driver side door control switch pushed
    Below 1 V
    3A-30 - Body ground
    O-G - Body ground
    Driver side door control switch input
    Door control switch not pushed
    Pulse generation
    Unlock side of driver side door control switch pushed
    Below 1 V
    3A-41 - Body ground*5
    LG - Body ground
    Passenger side door control switch input
    Door control switch not pushed
    Pulse generation
    Lock side of passenger side door control switch pushed
    Below 1 V
    3B-20 - Body ground*5
    W-R - Body ground
    Passenger side door control switch input
    Door control switch not pushed
    Pulse generation
    Unlock side of passenger side door control switch pushed
    Below 1 V
    D6-11 (LSFD) - Body ground*7
    W - Body ground
    Driver side door lock position switch input
    Driver side door unlocked
    Below 1 V
    Driver side door locked
    Pulse generation
    D6-12 (LSFP) - Body ground*7
    SB - Body ground
    Passenger side door lock position switch input
    Passenger side door unlocked
    Below 1 V
    Passenger side door locked
    Pulse generation
    3D-2 - Body ground*6
    R - Body ground
    Driver side door double lock motor set off output
    Door lock set → unset
    Below 1 V → 11 to 14 V → Below 1 V
    3D-3 - Body ground*6
    Y - Body ground
    Passenger side door double lock motor set off output
    Door lock set → unset
    Below 1 V → 11 to 14 V → Below 1 V
    3D-14 - Body ground*6
    BR - Body ground
    Driver side door double lock motor set on output
    Door lock unset → set
    Below 1 V → 11 to 14 V → Below 1 V
    3D-15 - Body ground*6
    P - Body ground
    Passenger side door double lock motor set on output
    Door lock unset → set
    Below 1 V → 11 to 14 V → Below 1 V
    3B-4 - Body ground
    L-W - Body ground
    Door lock motor unlock drive output (for passenger side)
    Door control switch not pushed
    Below 1 V
    Unlock side of door control switch pushed
    11 to 14 V
    3D-26 - Body ground
    SB - Body ground
    Luggage compartment door courtesy light switch input
    Luggage compartment door open
    Below 1 V
    Luggage compartment door closed
    11 to 14 V

    1. *1: w/ Key-linked Switch
    2. *2: w/ Entry and Start System
    3. *3: w/o Passenger Side Door Control Switch
    4. *4: w/o Double Locking System
    5. *5: w/ Passenger Side Door Control Switch
    6. *6: w/ Double Locking System
    7. *7: w/ Entry and Start System