Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT PADDLE SWITCH

SHIFT PADDLE SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING PAD
(Click here)


2. REMOVE STEERING WHEEL ASSEMBLY


    C260489E01
  1. Remove the steering wheel assembly set nut.
    Text in Illustration 
    *1
    Matchmark

  1. Put matchmarks on the steering wheel assembly and steering main shaft.

  1. Disconnect the connectors from the spiral cable sub-assembly and steering wheel assembly.



    C260490E01
  1. Using SST, remove the steering wheel assembly.
    Text in Illustration 
    *a
    Turn
    *b
    Hold

    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05031)

    NOTICE:
    Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.



3. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    C261035
  1. Detach the clamp.



    C261036
  1. Remove the 4 screws and remove the shift paddle switch (transmission shift switch assembly).