Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
  1. Engage the 2 claws and install the back door opener switch assembly.



2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
  1. Engage the clip to install the 3 screws and the luggage compartment door outside garnish sub-assembly.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

  1. Connect the 2 license plate light connectors.

  1. Connect the back door opener switch assembly connector.



3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder)
  1. Install the new luggage compartment door lock cylinder packing.

    NOTICE:
    Do not reuse the removed packing. Be sure to install a new luggage compartment door lock cylinder packing to prevent water ingress.



4. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)
  1. Connect the luggage compartment door lock cable to the luggage compartment door lock cylinder assembly.

  1. Install the luggage compartment door lock cylinder assembly with the 2 nuts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }



5. INSTALL LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System)


    B310905
  1. Install the luggage compartment door cover with the 7 clips.