Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH

TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LHD and RHD vehicles.
  2. The procedure listed below is for the LHD vehicles.



1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
  1. Engage the 2 claws and install the tire pressure warning reset switch.



2. INSTALL SWITCH BASE
  1. Engage the 4 claws to install the switch base.



3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
  1. Connect each connector.

  1. Engage the 2 claws.

  1. Engage the 6 clips to install the No. 1 instrument panel under cover sub-assembly.

  1. Install the screw.



4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
  1. Connect each connector.



    B312545E01
  1. for Automatic Air Conditioning System for RHD:

    1. Connect the connector.

    2. Engage the guide and connect the aspirator hose.
      Text in Illustration 
      *1
      Aspirator Hose

  1. Engage the 4 claws.

  1. Engage the 4 clips to install the No. 1 instrument panel under cover sub-assembly.

  1. Install the 2 screws.



5. INSTALL INSTRUMENT SIDE PANEL LH

HINT:
Use the same procedure as for the RH side.