Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System)


    B310905
  1. Remove the 7 clips and luggage compartment door cover.



2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)


    B311555
  1. Remove the 2 nuts and the luggage compartment door lock cylinder assembly.



    B311556E01
  1. Disconnect the luggage closer cable assembly.
    Text in Illustration 
    *1
    Luggage Closer Cable Assembly



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder)


    B311557E01
  1. Remove the luggage compartment door lock cylinder packing.

    NOTICE:
    Do not reuse the removed packing. Be sure to install a new luggage compartment door lock cylinder packing to prevent water ingress.

    Text in Illustration 
    *1
    Luggage Compartment Door Lock Cylinder Packing



4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    B313074
  1. Disconnect the back door opener switch assembly connector.

  1. Remove the back door opener switch assembly grommet.



    B313075
  1. Disconnect the 2 license plate light connectors.



    B313076
  1. Remove the 3 nuts.

  1. Disengage the clip and remove the luggage compartment door outside garnish sub-assembly.



5. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    B310915
  1. Disengage the 2 claws and remove the back door opener switch assembly.