OUTER REAR VIEW MIRROR > INSTALLATION |
| 1. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH |
Retract the outer rear view mirror sub-assembly LH.
Install the outer rear view mirror sub-assembly LH with the 3 bolts.
![]() |
Align the matchmark on the wire harness with the harness clip on the body side, and install the wire harness.
| *a | Matchmark |
| 2. INSTALL LOWER OUTER MIRROR COVER LH |
Engage the 5 claws and install the lower outer mirror cover LH.
| 3. INSTALL FRONT DOOR SERVICE HOLE COVER LH |
Apply butyl tape to the front door panel.
Pass the front door lock remote control cable assembly and the front door inside locking cable assembly through a new front door service hole cover.

| *1 | Reference Point | - | - |
Attach the front door service hole cover according to the reference points on the front door panel.
Connect each connector.
| 4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Connect the front door lock remote control cable assembly and front door inside locking cable assembly to the front door inside handle.
| *1 | Front Door Inside Locking Cable Assembly |
| *2 | Front Door Lock Remote Control Cable Assembly |
Connect each connector.
![]() |
Engage the 10 clips and install the front door trim board sub-assembly.
![]() |
Engage the clip and install the 3 screws.
![]() |
Engage the claw and install the cap.
| 5. INSTALL DOOR ARMREST COVER LH |
![]() |
Engage the guide and 7 claws, and install the door armrest cover.