WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System) > DIAGNOSIS SYSTEM |
| DESCRIPTION |
| CHECK DLC3 |
Check the DLC3 (Click here).
| SELF-DIAGNOSTIC MODE (USING GTS) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry&Start / Utility / Wireless Door Lock Diagnosis Mode.
Proceed to the next step in accordance with the prompts on the GTS screen.
![]() |
Check that the system has switched to self-diagnostic mode by checking the wireless door lock buzzer output pattern.
Check the diagnostic outputs when the electrical key transmitter sub-assembly switch is held down. The diagnostic outputs can be checked by the interior light and wireless door lock buzzer patterns.

| A | Normal |
| B | Register wireless code |
| C | Wave interference or malfunction of a related component |