OUTER REAR VIEW MIRROR GLASS > REMOVAL |
| 1. REMOVE OUTER MIRROR LH |
![]() |
Push the outside part of the outer rear view mirror sub-assembly LH and tilt it as show in the illustration.
![]() |
Push the upper part of the mirror surface and tilt it.
Apply protective tape as shown in the illustration.
| *1 | Protective Tape |
![]() |
Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror sub-assembly, and separate the outer mirror.
| *1 | Moulding Remover |
w/o Mirror Heater:
![]() |
Disengage the 2 claws at the upper part of the outer mirror LH.
Remove the outer mirror.
w/ Mirror Heater:
![]() |
Disengage the 2 claws at the upper part of the outer mirror LH.
Disconnect the 2 connectors and remove the outer mirror LH.