Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Combination Meter / DTC.

  5. Check DTCs and then write them down.

    HINT:
    Refer to the GTS operator's manual for further details.

  6. Confirm the details of the DTCs.


CLEAR DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON (do not start the engine).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Combination Meter / DTC / Clear.

    HINT:
    Refer to the GTS operator's manual for further details.

  5. Clear DTCs by pressing the YES button on the tester.

    HINT:
    Refer to the GTS operator's manual for further details.