Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for Halogen Headlight)

HEADLIGHT ASSEMBLY (for Halogen Headlight) > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for RH and LH sides.
  2. The procedure listed below is for LH side.



1. REMOVE NO. 1 HEADLIGHT BULB


    B312182
  1. Disconnect the connector.



    B312183
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

    NOTICE:
    Do not touch the bulb glass.



2. REMOVE NO. 2 HEADLIGHT BULB


    B312184
  1. Disconnect the connector.



    B312185
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

    NOTICE:
    Do not touch the bulb glass.



3. REMOVE CLEARANCE LIGHT BULB (w/o Side Marker Light)


    B312186
  1. Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

  1. Remove the clearance light bulb from the headlight cord.



4. REMOVE HEADLIGHT CORD


    B312187
  1. Disengage the claw to remove the headlight cord.