Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for Halogen Headlight)

HEADLIGHT ASSEMBLY (for Halogen Headlight) > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for RH and LH sides.
  2. The procedure listed below is for LH side.



1. INSTALL HEADLIGHT CORD


    B312187
  1. Engage the claw to install the headlight cord.



2. INSTALL CLEARANCE LIGHT BULB (w/o Side Marker Light)
  1. Install the clearance light bulb to the headlight cord.



    B312188
  1. Turn the headlight cord with clearance light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.



3. INSTALL NO. 2 HEADLIGHT BULB


    B312189
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

    NOTICE:
    Do not touch the bulb glass.



    B312184
  1. Connect the connector.



4. INSTALL NO. 1 HEADLIGHT BULB


    B312190
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

    NOTICE:
    Do not touch the bulb glass.



    B312182
  1. Connect the connector.