Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for HID Headlight)

HEADLIGHT ASSEMBLY (for HID Headlight) > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL HEADLIGHT GASKET


    B312200
  1. Install a new headlight gasket.



2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY


    B312199
  1. Connect the connector.



    B312198
  1. Install the headlight light control ECU sub-assembly with 4 screws.



3. INSTALL DISCHARGE HEADLIGHT BULB
  1. Install the discharge headlight bulb.

    NOTICE:
    Do not touch the bulb glass.



    B312201E01
  1. Lock the set spring indicated by the arrow in the order shown in the illustration.



    B312202
  1. Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly socket.



4. INSTALL HEADLIGHT COVER


    B312203
  1. Turn the headlight cover in the direction indicated by the arrow in the illustration to install it.