Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


    E194514E01
  1. Using pliers, expand the clamp as shown in the illustration.
    Text in Illustration 
    *1
    Clamp



    E194515
  1. While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.

  1. Engage the claw.



    B314906
  1. Release the clamp to install the headlight dimmer switch assembly.

  1. Connect the connector.



2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    B314883
  1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.

  1. Connect the connector.



3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
(Click here)