Home › Engine / Hybrid System › FA20 INTAKE / EXHAUST › CHAMBER

CHAMBER > INSTALLATION

for Preparation Click here



1. INSTALL CHAMBER ASSEMBLY
  1. Install the air cleaner duct to the chamber assembly with a hose clamp.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



2. INSTALL AIR CLEANER DUCT
  1. Install the 2 bolts and the air cleaner duct with the chamber.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }

  1. Install the air cleaner duct with a hose clamp.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



3. INSTALL HOSE
  1. Engage the 2 clamps and install the hose.



    A282909E01
    A281074
  1. Insert the hose in until its flange contacts that of the grommet.
    Text in Illustration 
    *1
    Grommet
    *a
    Flange

    NOTICE:
    1. Do not convolute the grommet when insert the hose to the grommet.
    2. Check the grommet from the vehicle interior side to verify that it is properly installed onto the body.

  1. Connect the hose.