Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › PATTERN SELECT SWITCH

PATTERN SELECT SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL PATTERN SELECT SWITCH ASSEMBLY
  1. Install the pattern select switch assembly with the 2 screws.



2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 2 clips and 4 claws to install the upper console panel sub-assembly.



3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B315239
  1. Turn the knob clockwise to install the shift lever knob sub-assembly.

    NOTICE:
    1. Tighten the shift lever knob until the tightening on the shift lever knob stiffens.

    1. B321464E01
      Face the groove on the shift lever knob toward the rear of the vehicle.
      Text in Illustration 
      *1
      Groove