Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › PATTERN SELECT SWITCH

PATTERN SELECT SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B315179
  1. Turn the knob counterclockwise and remove the shift lever knob sub-assembly.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B315181
  1. Disengage the 2 clips and 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.



3. REMOVE PATTERN SELECT SWITCH ASSEMBLY


    C257479
  1. Remove the 2 screws and the pattern select switch assembly.