ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System) > DTC CHECK / CLEAR |
| CHECK FOR MAIN BODY ECU (NETWORK GATEWAY ECU) DTC |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check for DTCs.
| CHECK FOR ECM DTC |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Check for DTCs.
| CLEAR MAIN BODY ECU (NETWORK GATEWAY ECU) DTC |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.
| CLEAR ECM DTC |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Clear the DTCs.